
Rated 700 to 2,400 kW at 1,000–1,500 r/min, the 6000 series is the top of the 190 family and the engine behind most large land rigs, drilling-platform power packs and locomotive applications. Combustion, torsional behaviour and turbo matching were modelled with AVL before the first casting was made.
The 6000 series is the big-bore duty engine for deep drilling: 16-cylinder builds reach 2,400 kW at 1,500 r/min with 16-cylinder displacement of 97.53 L.
| Model | 12 h rating (kW) | Speed (r/min) | Continuous rating (kW) | Speed (r/min) | Fuel (g/kW·h) | Lube oil (g/kW·h) | L×W×H (mm) | Net mass (kg) |
|---|---|---|---|---|---|---|---|---|
| H12V190Z_L | 1740 | 1500 | 1560 | 1500 | ≤200 | ≤1.0 | 3234×1140×2286 | 9500 |
| H12V190PZ_L | 1740 | 1500 | 1560 | 1500 | ≤200 | ≤1.0 | 5417×3145×3174 | 13700 |
| H12V190Z_L-1 | 1400 | 1200 | 1260 | 1200 | ≤200 | ≤1.0 | 3234×1140×2286 | 9500 |
| H12V190PZ_L-1 | 1400 | 1200 | 1260 | 1200 | ≤200 | ≤1.0 | 5417×3145×3174 | 13700 |
| H12V190Z_L-2 | 1160 | 1000 | 1040 | 1000 | ≤200 | ≤1.0 | 3234×1140×2286 | 9500 |
| H12V190PZ_L-2 | 1160 | 1000 | 1040 | 1000 | ≤200 | ≤1.0 | 5417×3145×3174 | 13700 |
| H16V190Z_L | 2400 | 1500 | 2160 | 1000 | ≤200 | ≤1.0 | 3525×2060×2331 | 13000 |
The 16-cylinder row is quoted at its published continuous point of 2,160 kW and 1,000 r/min.
Translated from the 6000 Series Land Diesel Engine datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.
We build 6000 Series Land Diesel Engine in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.
Tell us the duty you have in mind for 6000 Series Land Diesel Engine and we will confirm which row of the table applies, or quote a special build when none of them fits.
Development ran jointly with AVL and Chinese universities: combustion process, crankshaft torsional vibration, turbocharger matching and gas exchange were simulated and optimised before prototype build. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.
The 6000 exists because a 190 block at 2,000 kW needs a different combustion system, and AVL modelling is cheaper than a failed field trial.

The top frame in the range, 700 to 2,400 kW at 1,000 to 1,500 r/min, a bracket an oilfield diesel engine manufacturer is expected to cover without leaving its own block family.
A drilling rig diesel engine at this size usually drives the whole rig through the compound, or a power pack on a platform.

190 Series Diesel Engines

190 Series Gas Engines

190 Series Diesel Engines

190 Series Diesel Engines