
JC15 and 140 series high-speed diesel generator sets from 400 to 900 kW for rig power, mobile stations and industrial duty, rated at 50 or 60 Hz.
Four standard builds are tabulated. Ratings are site-rated; the quotation confirms the altitude, ambient and fuel derates for your location.
| Model | Power kW | Speed r/min | Voltage V | Frequency Hz | Dimensions mm | Mass kg |
|---|---|---|---|---|---|---|
| 400GF30 | 400 | 1,500 | 400 / 6,300 / 10,500 | 50 | 3,420 × 1,270 × 1,654 | 3,300 |
| 450GF30 | 450 | 1,800 | 480 / 13,800 | 60 | 3,420 × 1,270 × 1,654 | 3,300 |
| 800GF30 | 800 | 1,500 | 400 / 6,300 / 10,500 | 50 | 4,500 × 1,941 × 2,031 | 6,500 |
| 900GF30 | 900 | 1,800 | 480 / 13,800 | 60 | 4,500 × 1,941 × 2,031 | 6,500 |
Figures taken from the JC15 Generator Sets (140 Series) data sheet issued by BOMCO. Values are nominal and the quotation confirms the build for your order.
The 140 series is a high-speed diesel engine developed with AVL and owned outright, built for light drilling rigs, oilfield machinery, mobile power stations, construction equipment and heavy trucks. The JC15 sits in that family: compact, simple to maintain, and with a power density that suits a rig floor where the engine room is measured in metres.
As a generating set it is sold by the rating and the site conditions, because the same engine covers 50 Hz and 60 Hz duty at different speeds, and the alternator, the skid and the control panel follow from that choice.
We build the set around the house load, the frequency and the voltage you actually run, and our alternators are wound for that duty rather than adapted to it. When the set arrives we commission it against your distribution scheme and train the operators on the panel we shipped. If a single set carries the whole load we will say that redundancy is the cheaper answer before you sign. Share the house load study and the set list follows from it. Our commissioning team sets the protection against your scheme, and we leave the settings with your electricians.
Two 400 or 450 kW sets in parallel give redundancy on a light rig and let one engine carry the house load while the other is serviced. The 800 and 900 kW builds are for higher house loads or single-set operation.
Yes. The 450 and 900 kW builds are 60 Hz units at 480 or 13,800 V; the alternator and the switchgear are wound and configured for that voltage, not adapted from a 50 Hz set.
Load bank test at the works, then start-up on site with the governor and the protection settings set against your distribution scheme, plus operator training on the panel we ship.
Each set is load-bank tested at the rating ordered before dispatch, and the test record travels with the unit.
Skid, alternator, control panel and cabling are supplied as one package, so the electrical interface is inside our scope rather than split between suppliers.
A high speed diesel engine generator for rig duty is not the same build as a standby set, and the JC15 engine is specified from the load profile rather than from the frame size.

Prime mover