Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Seismic Equipment

Seismic recording systems and shallow engineering seismographs

Seismic recorders, 24-bit acquisition spreads and shallow engineering seismographs supplied with geophones, exploders and test instruments as one crew kit.

Scope Supplied as a system rather than a single model. Ratings, dimensions and interfaces are issued as a data sheet with the quotation.

Request data sheet →

Specifications

System data

Channel count and spread layout are set by the survey design; the rows below describe what the family covers.

Conversion
24-bit acquisition
Telemetry
Cable and radio-linked spread options
Companion geophone
SN7C super geophone, matched set tolerances
Auxiliary instruments
Exploder, geophone tester, shallow refraction instrument
Channel count
Configured per crew and spread design
Scope
Recorder, sensors, cables, sources and field test gear as one order
Engineering system
GDZ24/48 lightweight acquisition system, 24 or 48 channels
Engineering applications
Shallow surface-wave reflection, refraction, VSP, cross-hole tomography
Field processing
Pre-stack single-shot display, AGC, HCF and LCF, built-in geophone test
Sectors served
Petroleum, coal, geology, highway, railway, archaeology

Figures taken from the Seismic Recorders and Engineering Seismographs data sheet issued by BOMCO. Values are nominal and the quotation confirms the build for your order.

A crew is limited by its recording system: how many channels it can lay, how much noise the spread accepts, and how quickly the field quality control catches a bad trace. The group's geophysical works builds the recorders, the geophones, the sources and the auxiliary instruments as one family, which is why the channel count, the telemetry and the QC software are specified together.

The same works builds the shallow instruments used for engineering work, where the target is the depth to bedrock or the rippability of a site rather than a reservoir.

The GDZ24/48 is the shallow end of the family: a 24 or 48 channel acquisition system light enough to carry to a site, used for high-resolution surface-wave reflection, refraction, VSP and cross-hole tomography in petroleum, coal, geology, highway, railway and archaeology work. It shows a single shot before stack, offers AGC, HCF and LCF processing in the instrument, and tests the geophones from the same panel.

We supply the recorder with the sensors, the cables and the field test gear from the same works, so a channel that fails its tolerance test is replaced from a matched string. Our instrument engineers train the crew on the recorder we ship, not on a borrowed unit, and we run the first production line with them. When a survey grows we would rather add channels to the spread than stretch the one we sold. Ask us for the crew kit list and we will price it against your survey design.

Capability

What this system covers

  • Recording systems24-bit acquisition with cable and radio-linked spreads, so a crew can mix a cable layout in open terrain with radio units in a village or a river crossing.
  • Field QCNoise, continuity and polarity checks run in the recorder as the spread is laid, not after the line is shot, which is what protects the production rate.
  • GeophonesThe SN7C super geophone was designed for 24-bit recorders: wide band, high spurious frequency, low distortion and a tight tolerance band across the string.
  • Engineering instrumentsShallow refraction instruments for overburden velocity, depth to bedrock and foundation work, with the exploder and the geophone tester from the same family.
  • Crew kitRecorder, geophones, cables, sources and test gear are quoted as one package against the survey design you are planning.
Questions we get

Selection notes

Can you supply a complete crew kit rather than instruments?

Yes. Recorder, geophones, cables, sources and the field test instruments are quoted together against your survey design, so the crew mobilises with matched equipment and one spares list.

What is an engineering seismograph used for?

Shallow refraction and site investigation: overburden velocity, depth to bedrock and the rippability of a foundation site. It is the same acquisition discipline as exploration work, applied to a few metres rather than a few kilometres.

How is field quality controlled?

Continuity, polarity and noise checks are done while the spread is being laid, so a bad trace is found before the shot. That is the practical difference between a recorder and a box of channels.

Supply notes

How this system is ordered and shipped

Instruments and sensors come from the same works, so a channel that fails the tolerance test is replaced from a matched string rather than from general stock.

Crew training and the field maintenance routine are supplied with the kit; spares lists follow the instruments you actually run.

As a seismic recorder manufacturer we deliver the recorder and the engineering seismograph scope as one crew kit, for surveys where shallow work runs alongside the main spread.

Other systems in this line

Seismic Crew Vehicles

Seismic Crew Vehicles

Field transport

Systems and packages

Where this system is used

Quote the Seismic Recorders and Engineering Seismographs against your project

Request a Quote →
BOMCO
Request a Quote