Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Power Equipment

3000/6000 Gas Engine and Genset

800–1,500 kW from the 3000 and 6000 blocks on gas, building up into generator sets or compressor drives for city supply and wellsite power. The later 16-cylinder version reaches 2,000 kW.

Specification Factory ratings, dimensions and masses are tabulated below, translated from the manufacturer's data sheet.

Request data sheet →

Specifications

Factory data

Purpose-built gas gensets: a 1,000 kW package on the AD12V190Z_L block for natural gas or biogas, and the 16-cylinder H block up to 1,500 kW.

Cylinder configuration
12 / 16 cylinders, 60° V
Type
Four-stroke, water-cooled, turbocharged and intercooled, spark ignition
Bore
190 mm
Stroke
215 mm
Direction of rotation
Counter-clockwise, viewed from the output end
Starting
Electric motor
Lubrication
Pressure and splash
Steady-state speed droop
0–5 %, adjustable

Genset packages

Genset modelEngine modelRated power (kW/kVA)Voltage (V)Frequency (Hz)L×W×H (mm)Net mass (kg)Fuel
1000GF-TK2AD12V190Z_LT_z1000/1250400/230505735×2312×277616500Natural gas
1000GF-NKAD12V190Z_LZ1000/1250400/230505735×2312×277616500Biogas

Engine ratings

Engine modelRated power (kW)Speed (r/min)Heat rate (kJ/kW·h)Lube oil (g/kW·h)L×W×H (mm)Net mass (kg)Fuel
AD12V190Z_LT_111001500≤11000≤1.62979×2312×24719300Natural gas
AD12V190Z_LT_211001500≤9500≤1.02979×2312×24719300Natural gas
AD12V190Z_LT_2-19001200≤9500≤1.02979×2312×24719300Natural gas
AD12V190Z_LT_2-28001000≤9500≤1.02979×2312×24719300Natural gas
H12V190Z_LT15001500≤9500≤1.03830×1792×23159300Natural gas
H16V190Z_LT-212001000≤9500≤1.03692×2516×253613000Natural gas

The z suffix in the genset model denotes the packaged control and switchgear arrangement.

Translated from the 3000/6000 Gas Engine and Genset datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.

How we supply it

We build 3000/6000 Gas Engine and Genset in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.

Tell us the duty you have in mind for 3000/6000 Gas Engine and Genset and we will confirm which row of the table applies, or quote a special build when none of them fits.

Design details

How we build this unit

Application notes

Where it earns its place

Own-design high-power gas engine rather than a converted diesel. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.

The 16V build at 2,000 kW is the unit that lets a customer avoid an imported gas engine, and that is how we sell it.

Send the well programme →

3000/6000 Gas Engine and Genset detail view
Supply notes

How this unit is specified and shipped

The 3000 and 6000 blocks run to 1,500 kW, and to 2,000 kW in the 16-cylinder version; a natural gas generator set manufacturer is asked for the block first and the enclosure second.

A gas engine genset oilfield operators run for wellsite power takes its fuel from the field rather than from a diesel tank.

Equipment this unit runs with

Other power equipment models

3000 Series Long Stroke Diesel Engine

3000 Series Long Stroke Diesel Engine

190 Series Diesel Engines

3000 Series Marine Diesel Engine

3000 Series Marine Diesel Engine

190 Series Diesel Engines

6000 Series Land Diesel Engine

6000 Series Land Diesel Engine

190 Series Diesel Engines

6000 Series Marine Diesel Engine

6000 Series Marine Diesel Engine

190 Series Diesel Engines

Ask for a data sheet on 3000/6000 Gas Engine and Genset

Request a Quote →
BOMCO
Request a Quote