Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Coiled Tubing Units · 1 models

Coiled Tubing Units

Single-truck coiled tubing units with 70 MPa circulation, closed-loop injector hydraulics and integrated logging options, for sand cleanout, scale removal.

A coiled tubing unit earns its capital back on the jobs nobody else wants: sand bridges that will not wash, scale that has baked onto the tubing wall, wax and hydrate plugs, fish that a rig cannot reach cheaply. Our LXZ-5000 mounts the whole package on one truck — reel, injector, control cabin, BOP stack, hose reel and crane — so the unit can be on location, rigged up and running inside a shift.

The reel carries a welded steel drum of 3,006 mm outside diameter on a 1,829 mm core, with a rotary joint rated to 70 MPa for circulation. Temperature and pressure sensors sit on the circulation path, and the injector's two synchronised low-speed, high-torque hydraulic motors drive the chain through a closed-loop system, gripping 1 in, 1.25 in or 1.5 in tubing. Load cells under the injector put string weight directly on the cabin display, and the data logger stores, plots and queries job parameters afterwards.

For wells that need evaluation as well as cleanout, the LXC-3000 logging unit integrates coiled tubing operation with wireline data acquisition. The injector holds stable low speeds for downhole tools, the reel has a slip-ring interface at one end for signal transmission and a manifold connection at the other for circulation, and the hydraulic system allows the injector and reel to run independently or in coordination to hold a steady back-tension.

We build the reel, injector and cabin on one chassis, which is why our unit travels as a single permitted load rather than three.

Coiled Tubing · 1

Coiled Tubing Unit

Coiled Tubing Unit

Coiled Tubing

Capability

What our coiled tubing units line covers

  • Operating envelopeVertical and deviated wells; ambient –20 °C to +40 °C; circulation to 70 MPa.
  • InjectorClosed-loop hydraulic drive, two synchronised motors, 1 in / 1.25 in / 1.5 in tubing.
  • Reel3,006 mm OD welded drum, 1,829 mm core, pipe guide for even spooling.
  • ControlPLC with automatic and manual modes, constant-speed injector/reel control, alarms on all key parameters.
  • MobilitySingle-truck layout with integrated cabin, BOP stack and crane; rig-up in one shift.
Questions we get

Selection notes

What jobs is a coiled tubing unit best suited to?

Sand and scale cleanout, milling, well killing, nitrogen lifting, matrix stimulation and fishing in live or near-live wells. It replaces a workover rig when the job is circulation-based rather than pipe-based.

Is a separate BOP stack needed?

The unit ships with its own stack sized to the tubing and well pressure. The stack is mounted under the injector, so the well stays closed while the string moves.

Can the unit carry logging tools?

On the LXC-3000 variant, yes. The reel has a slip-ring interface and the control system runs in constant-speed mode for downhole acquisition.

Specification

Specifying a coiled tubing unit

We size the reel, injector head and control cabin against your CT string OD and expected trip depth. If the well has a history of differential sticking, say so early and we change the injector rating before the order.

Ask about coiled tubing units

Coiled tubing work is defined by the string, not the truck: diameter, wall thickness, expected reach and the pressure the job needs decide the reel capacity, the injector rating and the BOP stack. We size those three together because a string that fits the reel but not the injector is a unit that cannot run the job it was bought for.

API 5ST governs the tube itself, and the well control side follows the same API 16A and 16D practice used elsewhere in our range. The circulating package, the nitrogen equipment and the data logger are quoted as part of the unit so the operator does not assemble a spread from four suppliers.

The move matters as much as the specification. Our unit travels as a single permitted load, and we commission the injector and the reel together, with our engineer staying for the first job rather than handing over a manual.

Related lines

Where this line is used

Quote the coiled tubing units against your well programme

Request a Quote →
BOMCO
Request a Quote