
A beam unit with a horsehead at each end: the front one carries the polished rod, the rear one carries the counterweight through a secondary bridle. Moving the balance mass off the cranks and onto the beam reduces gearbox torque and lets balance follow the well as the fluid level changes.
Front and rear horseheads with separate bridle arrangements. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.
Our double-horsehead design moves balance mass onto the beam, so the gearbox sees a lower torque for the same polished-rod load.

The double horsehead pumping unit comes out when the balance mass has to leave the cranks, and a pumping unit supplier that only builds crank-balanced units sends the buyer elsewhere.
The double horsehead pumping unit carries the counterweight on the rear horsehead through a secondary bridle, which is what lowers gearbox torque.

Beam Pumping Units

Beam Pumping Units

Beam Pumping Units