Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Power Equipment

3000 Series Marine Diesel Engine

810–1,200 kW for trailing-suction, grab and cutter dredgers and other special workboats, as main or auxiliary power, and for dredge, conveyor and water-pump drives.

Specification Factory ratings, dimensions and masses are tabulated below, translated from the manufacturer's data sheet.

Request data sheet →

Specifications

Factory data

Two strokes share this crankcase — 215 mm for the standard marine build and 255 mm for the long-stroke variant — so the same footprint covers 1,000 to 1,630 hp.

Cylinder configuration
12 cylinders, 60° V
Type
Four-stroke, water-cooled, turbocharged and intercooled, direct-injection combustion chamber
Bore
190 mm
Stroke
215 / 255 mm
Total displacement
71.45 / 86.72 L
Compression ratio
14.5 : 1
Direction of rotation
Counter-clockwise, viewed from the output end
Starting
Air motor or electric motor
Lubrication
Pressure and splash

Rated outputs

ModelRated power (kW/hp)Speed (r/min)Fuel (g/kW·h)Lube oil (g/kW·h)L×W×H (mm)Net mass (kg)
A12V190Z_C1200/16301500≤205≤1.02969×1907×22069300
A12V190Z_C-11080/14701450≤205≤1.02969×1907×22069300
A12V190Z_C-2900/12251200≤205≤1.02969×1907×22069300
A12V190Z_C-3810/11001000≤205≤1.02969×1907×22069300
L12V190Z_C-11200/16301200≤202≤1.02950×1980×23129300
L12V190Z_C-21000/13601000≤202≤1.02950×1980×23129300

Long-stroke L models sit on the 255 mm crank and quote a slightly lower fuel figure (≤202 g/kW·h).

Translated from the 3000 Series Marine Diesel Engine datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.

How we supply it

We build 3000 Series Marine Diesel Engine in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.

Tell us the duty you have in mind for 3000 Series Marine Diesel Engine and we will confirm which row of the table applies, or quote a special build when none of them fits.

Design details

How we build this unit

Application notes

Where it earns its place

High output, low specific fuel consumption, long overhaul interval. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.

Dredgers punish an engine with load swings, so the 3000 marine build is quoted on overhaul interval as much as on power.

Send the well programme →

3000 Series Marine Diesel Engine detail view

Equipment this unit runs with

Other power equipment models

3000 Series Land Diesel Engine

3000 Series Land Diesel Engine

190 Series Diesel Engines

3000 Series Long Stroke Diesel Engine

3000 Series Long Stroke Diesel Engine

190 Series Diesel Engines

3000/6000 Gas Engine and Genset

3000/6000 Gas Engine and Genset

190 Series Gas Engines

6000 Series Land Diesel Engine

6000 Series Land Diesel Engine

190 Series Diesel Engines

Ask for a data sheet on 3000 Series Marine Diesel Engine

Request a Quote →
BOMCO
Request a Quote