Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Traveling Blocks · 1 models

Traveling Blocks

Traveling blocks built to API 8A and 8C with hardened sheave grooves, interchangeable sheaves and bearings matched to the crown block.

A traveling block is a set of sheaves, a frame and a bearing assembly that has to survive years of impact loading in a corrosive atmosphere. The design looks simple; the details decide how long it lasts. Our blocks are built to API 8A and 8C and to SY/T 5527, and carry the API monogram.

Two details matter most in service. First, the sheave grooves are quenched after machining, which raises surface hardness where the wire rope actually bears, so groove wear slows and rope life extends. Second, sheaves, bearings and the matching crown block parts are interchangeable, which means a rig in a remote field can swap a worn sheave from stock instead of waiting for a shipment.

Frames are fabricated from structural steel with the mass kept low relative to the rated load, because every kilogram of block weight is load the drawworks has to lift. Guards and anti-jump bars protect the rope path, and the block is supplied with the hook or hook-block combination specified for the rig's string weight.

We ship the block with the matching crown block and hook, so the three items share one part list and one inspection schedule.

Traveling Blocks · 1

Traveling Block

Traveling Block

Traveling Blocks

Capability

What our traveling blocks line covers

  • StandardsAPI 8A and 8C, SY/T 5527, API monogram held.
  • SheavesQuenched grooves for wear resistance; interchangeable with crown block sheaves and bearings.
  • FrameFabricated structural steel, low dead weight relative to rated capacity.
  • SafetyRope guards and anti-jump bars over the full sheave path.
  • MatchingSupplied as a set with crown block and hook for the rig's rated load.
Questions we get

Selection notes

Why does sheave interchangeability matter?

It converts a rig-down situation into a parts swap. Crown block and traveling block share the same sheave and bearing design, so one stock line covers both.

How is rated capacity selected?

From the rig's maximum hook load plus the fast-line and dead-line factors. The block is normally specified together with the crown block and hook as a matched set.

Is groove hardness measurable in the field?

Yes. Hardness checks on the groove surface are part of periodic inspection; a worn groove shows up as rope damage before the sheave itself fails.

Specification

Specifying blocks and hooks

We match sheave count, line size and load rating to the block-and-tackle you already string up, so the new block does not force a new drilling line spec. Give us the hook load and line parts and the drawing comes back for approval.

Ask about traveling blocks

The block is chosen by the string load, the line count and the sheave diameter the wire rope needs. That makes it a matched item rather than a standalone purchase: the crown block, the traveling block and the hook should share a sheave stock and a bearing part number, or a field swap turns into a shipment.

API 8A and 8C set the load rating and design practice, and our blocks use quenched sheave grooves so the wire rope wears against a hardened surface. We keep sheave and bearing stock for the models we have shipped, which keeps our lead time in weeks rather than months.

Every hook body is inspected before assembly, and the certificate travels with the unit. The serial number is stamped where it stays readable after years of service, because an unreadable number turns a routine recertification into a strip-down.

Related lines

Where this line is used

Quote the traveling blocks against your well programme

Request a Quote →
BOMCO
Request a Quote