
Coupling gearbox for dredger and sand-pump duty, built in five sizes from 1,600 to 8,000 kW: YOCQH1000, 1000A, 1000B, 1000C and above.
The YOCQH1000 coupling gearbox is built in three ratios, so the same housing covers 290 r/min input and 600 r/min input driven by a 4,500 kW prime mover.
| Parameter | YOCQH1000 | YOCQH1000A | YOCQH1000B |
|---|---|---|---|
| Rated input speed (r/min) | 290 | 600 | 600 |
| Transmitted power (kW) | 1600 | 2200 | 4500 |
| Front spur gear ratio | 3.4 | 1.74 | 2.19 |
| Rear spur gear ratio | 3.33 | 3.4 | 4.23 |
| Rated slip | 3 %–5 % | 3 %–5 % | 3 %–5 % |
| Rated output speed (r/min) | 290 | 300 | 300 |
| Working oil temperature (°C) | 110 | 110 | 110 |
| Cooling | Water | Water | Water |
| L×W×H (mm) | 2140×1956×2035 | 2140×1956×2035 | 2532×2288×2165 |
| Weight (kg) | 6850 | 8450 | 9850 |
Use No. 6 hydraulic coupling oil above −20 °C ambient; No. 8 below −20 °C.
Translated from the YOCQH1000 Coupling Gearbox datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.
We build YOCQH1000 Coupling Gearbox in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.
Tell us the duty you have in mind for YOCQH1000 Coupling Gearbox and we will confirm which row of the table applies, or quote a special build when none of them fits.
Replaces the mechanical reduction gearbox on a dredger without losing load start or overload protection. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.
On a dredger the gearbox is the transmission, and the coupling version replaces the mechanical box without losing overload protection.


Power Control

190 Series Diesel Engines

Hydraulic Transmissions

Hydraulic Transmissions