Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Power Equipment

KYN28-12 Drawout Switchgear

Indoor metal-clad drawout switchgear for 3–10 kV, 50 Hz, single busbar or split single busbar systems, used for generator outgoing feeders, plant distribution and large motor starting.

Specification Factory ratings, dimensions and masses are tabulated below, translated from the manufacturer's data sheet.

Request data sheet →

Specifications

Factory data

KYN28-12 is the 12 kV metal-clad draw-out switchgear: 3.6 / 7.2 / 12 kV rated voltage, 40 kA thermal and 125 kA dynamic capability at the top of the range.

Rated voltage
3.6 / 7.2 / 12 kV
Dielectric withstand voltage, 1 min
42 kV
Lightning impulse withstand voltage
75 kV
Rated frequency
50 Hz
Main busbar rated current
630 / 1,250 / 1,600 / 2,000 / 2,500 / 3,150 / 4,000 A
Branch busbar rated current
630 / 1,250 / 1,600 / 2,000 / 2,500 / 3,150 A
Thermal stability current, 3 s (rms)
16 / 20 / 25 / 31.5 / 40 / 50 kA
Rated dynamic stability current (peak)
40 / 50 / 63 / 80 / 100 / 125 kA
Degree of protection
IP4X enclosure; IP3X with the compartment or breaker door open

Short-circuit capacity of the current transformers is calculated separately for each order.

Translated from the KYN28-12 Drawout Switchgear datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.

How we supply it

We build KYN28-12 Drawout Switchgear in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.

Tell us the duty you have in mind for KYN28-12 Drawout Switchgear and we will confirm which row of the table applies, or quote a special build when none of them fits.

Design details

How we build this unit

Application notes

Where it earns its place

Metal-clad, drawout construction for 3–10 kV distribution. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.

Generator outgoing feeders and large motor starting are the two jobs this 3 to 10 kV cubicle is quoted for most often.

Send the well programme →

KYN28-12 Drawout Switchgear detail view
Supply notes

How this unit is specified and shipped

KYN28 switchgear covers generator outgoing feeders, plant distribution and large motor starting, and a 12kV metal clad switchgear manufacturer is judged on the breaker compartment rather than the enclosure.

Equipment this unit runs with

Other power equipment models

Inline Land Diesel Engine

Inline Land Diesel Engine

190 Series Diesel Engines

Ask for a data sheet on KYN28-12 Drawout Switchgear

Request a Quote →
BOMCO
Request a Quote