
110–550 kW, the first generation of gas-fuelled 190 engines and still the widest-selling frame in the field. External mixing keeps the build simple and the service familiar.
External-mix gas engines meter the gas ahead of the cylinder, which suits low-pressure wellhead gas and keeps the intake charge cooler.
| Genset model | Engine model | Rated power (kW/kVA) | Voltage (V) | Frequency (Hz) | L×W×H (mm) | Net mass (kg) | Fuel |
|---|---|---|---|---|---|---|---|
| 75GFZ-T | 4190T_1-2 | 75/93.75 | 400/230 | 50 | 3766×1560×1737 | 5300 | Natural gas |
| 125GFZ-T | 4190Z_LT_1-2 | 125/156.25 | 400/230 | 50 | 4106×1900×1896 | 7500 | Natural gas |
| 210GFZ-T | 6190Z_LT-2 | 210/262.5 | 400/230 | 50 | 5105×2006×2110 | 8690 | Natural gas |
| 250GF-TK | 6190Z_LT-2 | 250/312.5 | 400/230 | 50 | 4935×1760×2441 | 8690 | Natural gas |
| 400GF-NK | 12V190Z-2 | 400/500 | 400/230 | 50 | 5120×2200×2312 | 11300 | Biogas |
| 400GF-T | 12V190DT_z-2 | 400/500 | 400/230 | 50 | 6470×2110×2195 | 11800 | Natural gas |
| 400GF-TK | 12V190DT_z-2 | 400/500 | 400/230 | 50 | 4566×2040×2195 | 11800 | Natural gas |
| 450GF-1-NK | 12V190Z_DZ-2 | 450/562.5 | 400/230 | 50 | 5120×2200×2312 | 11300 | Biogas |
| 500GF18-TK | 12V190ZDT-2 | 500/625 | 400/230 | 50 | 4566×2040×2278 | 11800 | Natural gas |
| Engine model | Rated power (kW) | Speed (r/min) | Compression ratio | Cylinder configuration | L×W×H (mm) | Net mass (kg) | Fuel |
|---|---|---|---|---|---|---|---|
| 4190T_1-2 | 110 | 1000 | 9 : 1 | 4 cylinders in line | 2405×1442×1645 | 3000 | Natural gas |
| 4190Z_LT_1-2 | 165 | 1000 | 10 : 1 | 4 cylinders in line | 3560×1525×1730 | 3000 | Natural gas |
| 6190Z_LT-2 | 270 | 1000 | 8 : 1 | 6 cylinders in line | 2990×1725×1801 | 3960 | Natural gas |
| 12V190DT_z-2 | 450 | 1000 | 9 : 1 | 12 cylinders, 60° V | 2670×1588×1898 | 5300 | Natural gas |
| 12V190Z_DZ-2 | 500 | 1000 | 8 : 1 | 12 cylinders, 60° V | 2670×1588×2072 | 5300 | Biogas |
| 12V190Z_DW-2 | 500 | 1000 | 8 : 1 | 12 cylinders, 60° V | 2670×1588×2072 | 5300 | Coal gas |
| 12V190Z-2 | 500 | 1000 | 9 : 1 | 12 cylinders, 60° V | 2670×1588×1898 | 5300 | Biogas |
| 12V190ZDT-2 | 550 | 1000 | 8 : 1 | 12 cylinders, 60° V | 2670×1588×2538 | 5300 | Natural gas |
Heat rate is quoted on lower calorific value of the gas; methane number should be checked before selecting a compression ratio.
Translated from the 190 Series External Mixing Gas Engine datasheet issued by BOMCO. Figures are factory values in SI units; the quotation confirms the exact build for your order.
We build 190 Series External Mixing Gas Engine in Baoji and test each unit against the figures above before it leaves the works. Our engineers set the rating point at commissioning to suit your fuel, altitude and ambient conditions, and we hand over the signed test sheet with the unit.
Tell us the duty you have in mind for 190 Series External Mixing Gas Engine and we will confirm which row of the table applies, or quote a special build when none of them fits.
Derived directly from the 190 diesel, so the bottom end and service routines are known to every rig crew. That is the detail a catalogue listing usually leaves out, and the one that decides whether the unit suits the well in front of you.
This is the simplest gas engine we build, and its value is that any 190-trained crew can service it.

The external-mixing 190 frame, still the widest-selling build in the field, runs 110 to 550 kW; a natural gas engine generator supplier keeps it because the field keeps asking.

Gas Gensets

190 Series Gas Engines

190 Series Gas Engines

190 Series Diesel Engines