Fifteen product lines, 122 models and eleven systems currently listed. Every specification below is taken from the equipment we build, and every unit is quoted against a well programme rather than a stock number.
The catalogue is organised the way a drilling programme is organised: what makes the hole, what lifts the string, what controls the pressure, and what keeps the well producing afterwards. Drilling equipment is the largest line by model count because a rig is an assembly of mast, substructure, drawworks, rotary, top drive, pumps and solids control, and we build each of those as a separate unit, so any one can be replaced or upgraded on its own.
Workover, coiled tubing and cementing cover the intervention side of the business: pulling and running pipe, circulating without a rig, and getting cement into the right place. Artificial lift and wellheads cover production, which is where most of our units spend the longest part of their life. Offshore packages follow the same standards, but we treat deck space and crane limits as design inputs rather than afterthoughts.
122 models across 15 product lines · updated from the works register

DC electric (SCR), AC VFD, mechanical, truck-mounted and slant configurations, 1,000–12,000 m.
30 models →
API 8A and 8C, SY/T 5527, API monogram held.
1 model →
API 8A and 8C, SY/T 5527, API monogram held.
1 model →
900–2,250 kN across the series, matched to 2 7/8 in to 4 1/2 in tubing strings.
1 model →
Vertical and deviated wells; ambient –20 °C to +40 °C; circulation to 70 MPa.
1 model →
Pressure vessel with vertical and horizontal tanks, on-board air supply, optional air-cement separator.
2 models →
A1, A2 and D body styles; conical or spherical sealing elements.
3 models →
Conventional beam, double-horsehead and bent-beam geometries.
4 models →
Tubing pumps and insert pumps, fixed and retrievable standing valves, mechanical and cup hold-downs.
6 models →
110–2,400 kW, land and marine, diesel, dual fuel and gas, including closed-loop lean-burn builds.
35 models →
IDAP6100 platform, single or single plus portable, with ACME acquisition control software.
15 models →
KZ-28 and KZ-34 vibroseis trucks and the LDM40 impulse source for shallow and VSP work.
12 models →
Spiral SAW to API 5L and GB/T 9711 in high grade and heavy wall; longitudinal SAW to large diameter.
6 models →
Triple offset, metal seated, thermal expansion compensation, replaceable seat ring, hot-state tested.
3 models →
7,000 m DC electric, bottleneck tower or telescoping mast, four-direction walking.
2 models →Eleven ranges sit inside the product lines above, each with its own string data and supply notes. We list them separately because we quote these as packages: the pieces are sized together and priced as one item. Start here when the question is how the pieces work together rather than which model to pick.

Motor, seal, gas separator, pump and cable quoted as one string for high-rate wells.
Artificial lift system →
Rotor, stator and surface drive head matched to viscous, sandy and dewatering wells.
Artificial lift system →
CP-series hulls and legs for self-elevating work, quoted against water depth and preload.
Offshore drilling unit →
PSV, AHTS and OSV hulls with deck load, sea-fastening and class detail in the offer.
Offshore marine unit →
26/32 gas and diesel engines quoted by fuel, ambient and load profile.
Prime mover →
400 to 900 kW packages on the JC15 block, wired for paralleling from the works.
Generator set →
Recorder and seismograph channel counts, sample rates and spread layout to survey design.
Acquisition system →
Swamp, desert and mountain carriers built around the drill rig and crew you move.
Field transport →
Catalyst slide valves for FCC units, with body, trim and actuator quoted against cycle duty.
Refinery valve →
Single and two-stage power recovery trains, sized from flue gas flow and inlet temperature.
Energy recovery →
Near-bit measurement, wireless receiver and telemetry quoted as one steering package.
Drilling system →Send depth, casing scheme and move frequency. We answer with a package.