Drilling, workover and well service equipment · Baoji, Shanxi, China
info@bomcochina.com Service centres: UAE · Kuwait · Oman · Saudi Arabia · Egypt
Applications · Refining

Refining and Petrochemical Valve Service

Refinery hot service is where ordinary valves fail: thermal cycling, entrained solids, and a tight shut-off needed on a line that cannot be isolated any other way.

The valves here exist for those specific duties rather than for general plant isolation. The triple offset butterfly valve is built for high-temperature regulating and isolating duty, with a double-body construction that compensates thermal expansion, hard-alloy overlay on the sealing faces and a replaceable seat ring. A fast-closing electro-hydraulic actuator with cushioning closes the valve before the seat sees the full velocity of the line, and a hot-state test procedure developed in house verifies the seat after cycling.

The delayed coker bottom valve decides cycle time more than any other valve on the unit. It seals the drum into the piping, shortens the cycle, and raises throughput while burning less steam and putting fewer hands at the drum. The safety interlock travels with the valve rather than as an extra line on the quotation.

The electric high-temperature gate valve covers the hot-line isolation duty around the unit: fabricated alloy body, lip seal at the body-to-bonnet joint, twin stuffing boxes in series and fast automatic shut-off. Two stuffing boxes matter because packing should not be the first thing to fail at temperature.

For FCC and similar units, the slide valve and flue gas expander sit in the same application conversation: the valve regulates the circulating catalyst, and the expander recovers the energy the flue gas carries out of the regenerator.

We test the valve hot before it leaves the works, because a seat that holds cold proves nothing about a coke drum. Our engineers review the line data before the actuator is sized, we hold seat rings for the turnaround window, and we attend the first installation. Refining valves are tested hot at the works, so the shutdown file carries a result rather than an intention. We also hold actuator spares for that valve model, because a turnaround window does not wait for a delivery.

What decides the outcome

Where it fits and what to check

  • Refining butterflyTriple offset, metal seated, thermal expansion compensated, replaceable seat ring, hot-state tested after cycling.
  • Coker bottomSealed drum isolation with safety interlock, shortened cycle time, low steam consumption, less manual work at the drum.
  • Refining gateElectric, fabricated alloy body, lip seal, twin stuffing boxes in series, fast automatic shut-off on hot lines.
  • FCCSlide valve for catalyst circulation control, and the flue gas expander for energy recovery from the regenerator offgas.
  • Refining sparesSeat rings and actuator spares held for turnaround schedules rather than quoted on request, because a missed turnaround window costs more than the part.
  • VerificationHot-state test procedure and material certificates supplied with the valve, so the shutdown file closes without a second visit.
Questions we get

Selection notes

Why triple offset rather than a resilient-seated butterfly valve?

A metal seat survives refinery temperature and repeated cycling; a resilient one does not. Offset geometry keeps the seat off the disc until the last few degrees, so the seal is not wiped on every stroke.

What does the coker bottom valve change in operation?

Each drum cycle gets shorter, and the unit runs at higher throughput with less steam and fewer manual steps at the drum. The gain shows up in the cycle sheet, not in the valve datasheet.

How is a refining hot-line gate valve kept serviceable?

Fabricated alloy body, a lip seal at the body-to-bonnet joint and two stuffing boxes in series, so packing is not the first component to fail at temperature. Seat and actuator spares are held for turnaround windows.

Equipment

Lines that carry this operation

Refining Valves carries the main duty, FCC Slide Valves covers the pressure side, and we quote the three as one scope where they meet on a location.

Related applications and services

Quote this application against your well programme

Refinery hot service is where ordinary valves fail: thermal cycling, entrained solids, and a tight shut-off needed on a line that cannot be isolated…

Request a Quote →
BOMCO
Request a Quote